Palms on Evaluate: Craftsman Deep Properly Sockets for Ball Lock Keg Posts

What Dimension Are Ball Lock Keg Posts?

There are two main publish sizes for traditional ball lock kegs.  11/16″ and seven/8″.  These can are available in each 6 level and 12 level, suitable variations.  I’ve seen two different publish sizes. 5/8″ and 9/16″.  I contemplate these extra non-standard.  This publish focuses on 11/16″ and seven/8″.

I normally use a wrench when coping with ball lock keg posts.  I’ve one wrench that works with each sizes – See: Palms on Evaluate: “Ball Lock Keg Wrench” – 11/16″+7/8″ Ratcheting Wrench – through Apollo Instruments Wrench Set – however having a socket is typically tremendous helpful and typically probably required.

What about 12 Level vs 6 Level Posts?

For the bigger 7/8″ posts I’ve seen each 6 level and 12 level types.  A 12 level socket will work on a 6 level publish, however not vice versa.  For the smaller 11/16″ posts I’ve solely seen 6 level.  To not say that 12 level don’t exist, I simply don’t recall seeing any.

This publish appears to be like at each sizes to show what I’m saying right here, nonetheless, when in search of a 7/8″ socket, I like to recommend a 12 level design.  That offers you the flexibleness to work with each 6 and 12 level fashion posts.  For the smaller 11/16″ socket, a 6 level design ought to work.

These Solely Work With Ball Lock Kegs, Why?

These sockets will solely work with normal Ball Lock Keg Posts.  Pin Lock Kegs require a particular socket that has a notch in it to permit the publish pin to slide by means of.

Tons extra information… What’s the Distinction Between Ball Lock Kegs and Pin Lock Kegs?

Should you want a Pin Lock Socket, See: Keg Sockets – Select Your Sockets – through Keg Connection, select the Pin Lock Choice

Palms on Evaluate Craftsman Sockets for Ball Lock Keg Posts

This publish appears to be like at 4 Craftsman Deep Sockets.  I bought these at Amazon.  Be aware that a number of variations of this product could also be out there, as such a distinct model could seem once you click on on the product hyperlink

• 11/16″ 6 level: CRAFTSMAN Deep Socket, SAE, 3/8-Inch Drive, 11/16-Inch, 6-Level (CMMT43336)
• 11/16″ 12 level: CRAFTSMAN Deep Socket, SAE, 1/2-Inch Drive, 11/16-Inch, 12-Level (CMMT47524)
• Not Advisable, See Conclusions on the finish of this assessment – 7/8″ 6 level: CRAFTSMAN Deep Socket, SAE, 3/8-Inch Drive, 7/8-Inch, 6-Level (CMMT43339)
• 7/8″ 12 level: CRAFTSMAN Deep Socket, SAE, 1/2-Inch Drive, 7/8-Inch, 12-Level (CMMT47528)

Because the driver that I maintain in my brewery space is 3/8″ drive, I additionally used this adapter

Craftsman Socket Adapter 1/2″ Drive to three/4″ (04271)

All 4 Craftsman Deep Properly SocketsProduct Tag for 7/’8 6 LevelProduct Tag for 7/’8 12 LevelProduct Tag for 11/16″ 6 LevelProduct Tag for 11/16″ 12 LevelA glance within the nicely aspect of the the 6 level socketsA glance into the motive force aspect of the 6 level socketsThe sockets with my 3/8″ drive Craftsman Ratchet.  Mine is mannequin 44808, however most 3/8″ drive ratchets ought to work.

Testing the Smaller 11/16″ Sockets

The 11/16″ 6 pt Deep Properly Socket works with a 11/16″ 6 pt Ball Lock SubmitOne other photograph: The 11/16″ 6 pt Deep Properly Socket works with a 11/16″ 6 pt Ball Lock SubmitWorky! The 11/16″ 6 pt Deep Properly Socket works with a 11/16″ 6 pt Ball Lock SubmitThe 11/16″ 6 pt Deep Properly Socket works with a 11/16″ 6 pt Ball Lock Submit on a ten Gallon Torpedo Keg – Palms on Evaluate.  In my expertise a suitable socket is a close to requirement in the event you personal this keg.  It’s potential to get to with a wrench, however robust.

Testing the Bigger 7/8″ Sockets

This can be a 7/8″ 6 level ball lock keg publish
The 7/8″ 6 pt Deep Properly Socket works with a 7/8″ 6 pt Ball Lock SubmitOne other photograph: The 7/8″ 6 pt Deep Properly Socket works with a 7/8″ 6 pt Ball Lock SubmitThis can be a 7/8″ 12 level ball lock keg publishNo worky – 7/8″ 6 pt Deep Properly Socket doesn’t work with a 12 pt Ball Lock SubmitThe 7/8″ 12 pt Deep Properly Socket DOES work a 7/8″ 12 pt Ball Lock Submit

3/8″ Driver to 1/2″ Socket

Because the driver that I maintain in my brewery space is 3/8″ drive, I additionally used this adapter – Craftsman Socket Adapter 1/2″ Drive to three/4″ (04271) – with the 1/2″ drive 12 pt socketsMy driver + adapter + 11/16″ 12 pt deep nicely My driver + adapter + 7/8″ 12 pt deep nicely

Conclusions

I’ve loads of expertise with Craftsman instruments.  I believe they produce high quality instruments at typically cheap costs.  These sockets are nicely made, typically nicely priced and work nicely to take away ball lock posts.

For the smaller 11/16″ ball lock posts it most likely is sensible to purchase a 6 level socket.  For bigger 7/8″ posts it is sensible to me to purchase a 12 level socket.  The 6 pt model works with 6 pt ball lock posts, but it surely’s doubtless you’ll run into each 6 pt and 12 pt designs.  Getting the 12 pt 7/8″ means you possibly can work with each.

Test Costs and Availability

Be aware that a number of variations of this product could also be out there, as such a distinct model could seem once you click on on the product hyperlink

• 11/16″ 6 level: CRAFTSMAN Deep Socket, SAE, 3/8-Inch Drive, 11/16-Inch, 6-Level (CMMT43336)
• 11/16″ 12 level: CRAFTSMAN Deep Socket, SAE, 1/2-Inch Drive, 11/16-Inch, 12-Level (CMMT47524)
• Not Advisable, See Conclusions Part – 7/8″ 6 level: CRAFTSMAN Deep Socket, SAE, 3/8-Inch Drive, 7/8-Inch, 6-Level (CMMT43339)
• 7/8″ 12 level: CRAFTSMAN Deep Socket, SAE, 1/2-Inch Drive, 7/8-Inch, 12-Level (CMMT47528)

Because the driver that I maintain in my brewery space is 3/8″ drive, I additionally used this adapter

Craftsman Socket Adapter 1/2″ Drive to three/4″ (04271)

Different Choices:

If you wish to go searching for different potential choices…

Search Amazon for “7/8″ deep socket 12 level” and 11/16″ deep socket

I recommend in search of suitable sizes, each to your driver and a correct dimension for the ball lock posts. you’ve gotten.  As talked about beforehand I like to recommend 12 pt for 7/8″ sockets.  Additionally search for high quality supplies and good opinions.

Additionally: Keg Sockets – Select Your Sockets – through Keg Connection

One other potential answer for 12 level 7/8″ Ball Lock Submit – See: Palms on Evaluate: “Ball Lock Keg Wrench” – 11/16″+7/8″ Ratcheting Wrench – through Apollo Instruments Wrench Set

Associated:

Rebuild Your Used Kegs!

Keg Offers!

Keg Evaluations!

Meals Grade Keg O-rings in Bulk!

Extra Homebrew Finds!

Additionally: Kegerator Ideas & Gear | Keg Restore Half #s | Current Keg Finds

Our High Draft Sources!

Be certain the parts you employ are suitable and rated to your meant utility.  Contact producer with questions on suitability or a particular utility.  All the time learn and observe producer instructions. assessment:craftsmansockets tag:tpr